-
-
Upgrade or replace that socket 478 motherboard with this Asus P4SD Socket 478 mATX motherboard! This motherboard features support for Socket 478 Intel Pentium 4 processors and includes the Intel 865GV + ICH5 chipset combination! It also features support for up to 4 GB of DDR 400 memory and IDE and SATA controllers!With three PCI slots, four USB 2.0 and other legacy ports, you'll have a wide selection of ports to connect your favorite components! Enjoy 6-channel audio with the Realtek ALC650 and create your own network with the Realtek RTL8101L Ethernet LAN! Save big and order now! WARNING: The solder used in this product contains lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and circuit boards and avoid inhalation of fumes if heating the solder. Features/Specifications: Asus P4SD Socket 478 i865GV mATX MotherboardGeneral Features: Intel 865GV Northbridge chipset Intel ICH5 Southbridge chipset Socket 478 mATX form factor Supports up to 4 GB DDR RAM (DDR400/350/333/266) Realtek ALC650 6-channel AC'97 audio codec Realtek RTL8101L 10/100 Ethernet LAN Two (2) IDE controllers Two (2) SATA ports One (1) floppy controllerExpansion Slots: Three (3) PCI slots Four (4) 184-pin DIMM socketsI/O Ports: Two (2) PS/2 ports One (1) 9-pin serial port One (1) 15-pin VGA Dsub connector One (1) 25-pin parallel port Four (4) USB 2.0 ports One (1) RJ-45 Ethernet jack Line-in, line-out and microphone jacks Supported Processors: Intel Pentium 4 and Celeron Socket 478 800/533/400 MHz FSB Supports Hyper-Threading Technology Northwood supportRegulatory Approvals: FCC CE Package Includes: Asus P4SD Socket 478 i865GV mATX Motherboard only Additional Information: Notes: Model: P4SD Motherboard is OEM for HP Motherboard only: I/O shield, cables, screws, etc. are not includedProduct Requirements: ATX case ATX power supply Supported processor Supported RAM Cables, screws, etc. Rest of systemView deals » -
Do you need to power your SATA hard drive but you ran out of connectors? This adapter will convert a 4-pin Molex power connector into one Serial ATA (SATA) power connector. Order today! Features/Specifications: 8-inch 4-pin Molex to SATA power connectorGeneral Features: 8-inch length Converts 4-pin Molex power to SATA power connector One (1) 4-pin Molex connector One (1) SATA power connector 18 AWG CSA Listed Package Includes: 4-pin Molex to SATA power connector Additional Information: Product Requirements: Available male 4-pin Molex power connectorView deals » -
Add a 25-pin parallel port to your PC with this MOSCHIP PCI Controller Card! Features include the MOSCHIP MCS9805CV chipset, one 25-pin parallel port and a 32-bit PCI interface! Plus, it's compatible with Microsoft Windows Vista!Order today! WARNING: The solder used in this product contains lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and circuit boards and avoid inhalation of fumes if heating the solder. Features/Specifications: MOSCHIP MOS9805CV 1-Port Parallel PCI Controller Card General Features: MOSCHIP MCS9805CV chipset One (1) 25-pin Parallel port 32-bit PCI interface PCI Specifications 2.1 Fast data rates of up to 1.5 Mbytes/s 16-byte FIFO Sets the I/O addresses automatically Compatible with Microsoft Windows VistaRegulatory Approvals: FCC CE Package Includes: MOSCHIP MCS9805CV 1-Port Parallel PCI Controller Card Manual Driver CD Additional Information: Product Requirements: MS-DOS Windows 98x/NT 4.x/2000/XP/Vista CD-ROM drive Available PCI slotView deals » -
HP LaserJet 4050 printer is both versatile and expandable. Featuring print speeds of up to 17 pages per minute and 1200 x 1200 dpi resolutions, this HP LaserJet 4050 delivers professional printing every time. It also includes 8 MB RAM, 100-sheet multipurpose tray, and is equipped with a Parallel port. The LaserJet 4050 printer is also expandable to 200 MB RAM. Features/Specifications: HP LaserJet 4050 Monochrome Laser Printer General Features: Monochrome laser printer Parallel interface Up to 17 ppm letter print speed Up to 16 ppm A4 print speed 13-seconds first page out1200 x 1200 dpi resolution NEC 4310 133MHz RISC microprocessor 8 MB RAM (200 MB maximum) 100-sheet multipurpose paper tray 500-sheet input paper tray Easy to use control panel Up to 65,000 pages per month duty cycle Supported Print Media:Copier paper Bond paper Special applicationRecycled paper LabelsTransparencies Supported Media Sizes:LetterLegalExecutivePower Specications: 100 - 127V, 50/60Hz, 4.8ARegulatory Approvals: FCCcUL VCCINOM Package Includes: HP LaserJet 4050 Parallel Laser PrinterDrivers CD Power cord Additional Information:View deals » Pages-
New Dell Poweredge 2950 Rail KitMerchant:visit store
Rate: Review this store
Merchant Logo:
Product ID:
Category: Computer
Brand: Pacific Geek
Promo: Miscellaneous
Description: New Dell PowerEdge 2950 Rapid Rail KitNew in Original Dell box. This is the EXACT same kit that you would receive if you ordered from Dell Direct – but at 1/2 of the price! This includes everything pictured, including: slide rail kit, cable management arm, hardware and instruction manual. Dell p/n H2845.The Tower-to-Rack Conversion Kit from Dell helps you to convert your tower oriented server to a rack-mounted unit. This product has been tested and validated on Dell systems and is compatible with Dell PowerEdge 2950 Server. It is supported by Dell Technical Support when used with a Dell system.Brand NEW Dell PowerEdge 2950/2970 Rapid/Versa rail kit. Kit is complete and new in the Dell OEM box. This kit will work on all Dell and non-Dell racks with square or round holes.
Other Details:
Similar Products
Featured ProductSponsored LinksLatest News
(31 December 1969)
...- View All News »
Popular Searches
-
* Must be complete