Language:
Pages
  •       Amcc/3ware 9650se-24m8 Sata2 Hardware Raid Controller Kit
    Amcc/3ware 9650se-24m8 Sata2 Hardware Raid Controller Kit
    Merchant:
    Rate: Review this store

    Merchant Logo:
    Pacific Geek

    Product ID:
    Category: Computer

    Brand: Pacific Geek

    Promo: SATA (Serial ATA)

    Description: Specification Mfr Part Number: 9650SE-24M8 KIT Features: 8th-generation StorSwitch non-blocking switched architecture On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives Bootable array support for greater fault tolerance Variable stripe size for performance tuning by application 64-bit LBA support ATA pass-through mode support Upto 512MB DDR2-533 memory with ECC protection. (see table below) 32 pooled DMA channels Complete configuration management suite: 3ware BIOS Manager 2 (3BM2): Easy to use BIOS configuration tool 3ware Disk Manager 2 (3DM2): Browser-based management tool Command Line Interface (CLI): Scriptable configuration tool SNMP support SMTP support for email/pager notification ATA-6 and Out of band (OOB) staggered drive spin-up support Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN Battery Backup Unit (BBU) support Multiple logical unit sizes and RAID levels on one card Multiple card support within a system for large storage requirements Hot-swap and hot-spare support for data availability Dynamic sector repair for robust data protection S.M.A.R.T. disk drive monitoring for reliability Emergency Flash Recovery protects against failed firmware upgrade Drive activity LED support Online Capacity Expansion and RAID Level Migration Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal Drive insertion and removal notification Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane) Chassis Control Unit for enclosure management via I2C Port: 24x SATA, Serial ATA 2.6 Specification support Host Interface: PCI-Express x8 Form Factor: Full height Raid Levels: 0, 1, 5, 6, 10, 50, Single Disk, JBOD Onboard Memory: 512MB DDR2-533 Connector Type: Multi-lane BBU Support: Yes BIOS PnP (plug and play) and BBS (BIOS boot specification) support Power Requirements: 18W maximum Dimensions (LxH): 7.23 x 4.19 inch / 18.37 x 10.66 cm

    Other Details:

    visit store

Add a Review/Comment

 

Similar Products

Featured Product
Sponsored Links
Latest News
Popular Searches