Language:
Pages
  •       802.11b/g/n Wireless N Lan/wireless Access Point Pci Card
    802.11b/g/n Wireless N Lan/wireless Access Point Pci Card
    Merchant:
    Rate: Review this store

    Merchant Logo:
    Pacific Geek

    Product ID:
    Category: Computer

    Brand: Pacific Geek

    Promo: Wireless

    Description: Exceeding common wireless standards such as 802.11b/g, this wireless network card is also 802.11 Draft-N compatible. 802.11 Draft-N also provides wider wireless coverage, so you don’t have to worry if your computer is far from your wireless access point! This wireless network card also supports MIMO (Multi-In, Multi-Out) technology, which uses two antennas for signal reception and one antenna for high power signal transmission to enhance data transfer rate (Up to 150 Mbps) and wireless coverage. Plus, the PCI card supports software AP function (turns the card to a wireless access point).With its easy-to-install PCI interface and Plug-and-Play technology, even inexperienced computer users can get this wireless network card installed on his or her computer in just few minutes! All you have to do is shutdown the computer and remove the cover and then insert the wireless network card into any empty PCI slot, that’s all! WARNING: The solder used in this product contains lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Please wash hands after handling internal components and circuit boards and avoid inhalation of fumes if heating the solder. Features/Specifications: 802.11b/g/n Wireless N LAN/Access Point PCI CardGeneral Features: PCI interface Ralink Chipset (RT2760T) Standards: IEEE 802.11b/g/Draft-N Frequency Band: 2.4000 ~ 2.4835 GHz (Industrial Scientific Medical Band) Data Rate: 11b: 1/2/5.5/11 Mbps / 11g: 6/9/12/24/36/48/54 Mbps / 11n (20 MHz): MCS0-7, up to 72 Mbps / 11n (40 MHz): MCS0-7, up to 150 Mbps Securities: WEP 64/128, WPA, WPA2 and Cisco CCX QoS function: control the bandwidth required for differentapplications Supports MIMO (Multi-In, Multi-Out) technology WPS configuration WPS button Supports software AP function (turns the card to a wireless access point)LEDs: Link TX/RXRegulatory Approvals: FCC CE Package Includes: PCI wireless network card Quick installation guide User manual/Device Driver CD-ROM Antennas (2 pcs) Additional Information: Notes: Wireless Access Point via AP ModeSystem Requirements: Desktop PC with Pentium 300 MHz-compatible processor or higher An empty PCI slot Windows 2000/2003/XP/Vista CD-ROM drive At least 100 MB of available disk space

    Other Details:

    visit store

Add a Review/Comment

 

Similar Products

Featured Product
Sponsored Links
Latest News
Popular Searches